System information

EAP3000 Users Manual

Version: 1.2

Issue Date: June 12, 2010

A firmware upgrade may sometimes require a complete reconfiguration of the device. See the

Release Notes which are included with the downloaded firmware file or go to the download page of

the website for more information. Read the Release Notes for any information related to the

upgrade before performing the upgrade operation.

To upgrade the router software:

Click Browse.

Select the uncompressed firmware image file stored on your computer.

Click Upgrade. A progress bar will appear displaying the status of the upload.

The device will take several minutes to complete the upgrade.

Once the image upgrade is complete, the device will automatically restart.

After a successful upgrade, the Login page will display. After logging in, go to the Status page

under the Management menu, to verify the firmware upgrade. The Firmware Version should be the

same as the version selected for the upgrade.

If the upgrade was unsuccessful, see "Trouble Shooting" in Reference Manual on the Resource CD.

5.2 Management -> Diagnostics

The diagnostics page is used to perform various diagnostics such as ping connectivity tests, system

reboot, and others.

Ping an IP Address

Ping: This utility can be used to test connectivity between this device and another device on the

network connected to this system. Type in an IP address and click ping to send an ICMP echo