System information

EAP3000 Users Manual

Version: 1.2

Issue Date: June 12, 2010

IMPORTANT!

Restoring a saved configuration or resetting to defaults will remove your current settings.

Configured APs, Profiles, RogueAP settings and all other settings will be lost. Please backup your

settings. Settings cannot be retrieved unless they have been backed up.

When the settings restore operation or the firmware upgrade is in progress:

1. Do NOT close the browser window.

2. Do NOT go online.

3. Do NOT turn off or power-cycle the device.

4. Do NOT shutdown the computer.

Backup/Restore Settings

To take a backup of the current settings:

Click Back Up.

You may be prompted to save a file with the extension “.cfg”. Select a safe location on your

computer and save the file.

The settings will be saved in this file.

To restore settings from a backup file:

Click Browse.

On your computer, locate and select the backup file you saved previously.

Click Restore.

A progress bar indicating the status of the restore operation will appear. The device will

automatically restart after the Restore Settings operation has completed.

To revert to the factory default settings, click Default.

The device will restart automatically after resetting to the factory default settings. The factory

default settings are as follows:

User Name: admin

Password: password

LAN Port 1 IP address: 192.168.1.1

Firmware Upgrade

New versions of firmware can be loaded onto the device in this section.

IMPORTANT!