System information

EAP3000 Users Manual

Version: 1.2

Issue Date: June 12, 2010

3.10 Wireless -> Radio

This device supports multiple radios over 1 or 2 WLAN cards. The table here shows the list of

available radios that an AP may use.

Radio: Depending on the WLAN card(s) used in this device, there are a maximum of 3 radios

supported per card (EAP3000 802.11 b/g or 802.11a card) and maximum of 1 radio supported by

Atheros 802.11a card; these are numerated 1 to 6 for the maximum of 2 WLAN cards.

Card: This field indicates which of the 2 cards the radio is using

Path: There are 3 possible paths on an EAP3000 card. Each radio is mapped to a unique path.

RogueAP Status: The green tick mark indicates that RogueAP detection is enabled on this radio;

the red ‘cancel’ icon indicates the RogueAP detection is disabled on this radio

Action/Edit: The edit button will link to the associated radio settings page.