System information

EAP3000 Users Manual

Version: 1.2

Issue Date: June 12, 2010

802.1X Re-authentication Interval: The timeout interval after which AP should re-authenticate

with RADIUS server.

Click Apply to save your changes.

Click Reset to revert to the previous settings.

3.8 Wireless -> RogueAP

This page summarizes the authorized and rogue APs configured for the system. A rogue AP is the

AP that is not authorized to be running in the wireless area covered by this AP(s).

An Administer can specify the list of authorized Access Points in the area in the “Authorized AP”

table. Any AP detected which is not in this list is recorded in RogueAP table.

BSSID: The BSSID of the AP

SSID: The SSID serviced by AP

Security: Security used by AP: None, WEP, WPA, WPA2, WPA+WPA2

Encryption: Encryption used by AP: WEP, TKIP, CCMP, TKIP + CCMP.

Authentication: Type of WPA/WPA2 authentication used by AP: PSK, RADIUS, PSK+RADIUS

Action/Edit: The edit button will link to the Authorized AP Configuration page, allowing you to

change the properties shown in the table for this AP.