System information

EAP3000 Users Manual

Version: 1.2

Issue Date: June 12, 2010

Radio: Select the physical radio(s) on which this AP will run; an AP can run on more than one

radio.

Mode: this selects the 802.11 modulation technique. This device supports 802.11b and 802.11g

modes. Select g only if all devices in the wireless network can support 802.11g. Select b only

mode if other devices and computers in the network can only support 802.11b. Select g and b if

there will be some devices in this wireless network that will use 802.11g and some that will use

802.11b.

VLAN Enabled: Select this check box to tag the traffic received from connected clients with this

AP with a VLAN id.

Default VLAN: VLAN id which will be used to tag the traffic from connected clients.

Maximum Associated Clients: The maximum number of clients that can connect to this AP.

Click Apply to save your changes.

Click Reset to revert to the previous settings.