User manual

4300T User Manual Edgewater Networks, Inc.
Version 1.7 56
Upgrade Procedure for Software Revision 1.3.11 or Later
Use this procedure if your 4300T is running software revision 1.3.11 or later. The
software version can be found on the System page of the web GUI.
A. Select System.
B. Select System Overview.
C. Select Upgrade firmware.
D. Enter the Download Server IP address of 204.202.2.188
204.202.2.188 is the public IP address of the FTP site hosted by Edgewater
Networks.
E. Enter the Filename: flash.bin
F. Press Submit.
You can follow the progress of the upgrade by selecting the refresh the upgrade
status link.
WARNING: Do not change the configuration or power off the device
until the write is 100 percent complete. The 4300T may become
unusable if the write is interrupted. The flash write can take up to 5
minutes depending on the speed of the download server.
The system will automatically restart after the new image has been loaded.
G. Verify that the upgrade was successful by checking the software revision
number found on the System page