User manual

4300T User Manual Edgewater Networks, Inc.
Version 1.7 55
List all backup files stored in FLASH. If no file has been saved, the command will only
return the # prompt.
Delete a Backup File
# ewn delete <filename>
Delete the backup file specified in the filename.
Load a Backup File so that it Becomes the Running Configuration
# ewn load <filename>
Loads the specified backup file into RAM and makes it the active running
configuration.
WARNING: Issuing this command will automatically restart the 4300T and
therefore interrupt any active voice calls and data sessions.
Chapter 6: Upgrading the 4300T
This chapter describes how to upgrade your 4300T to
the latest software release available from Edgewater
Networks. Information on the latest release can be
found in the release notes section of our website at:
http://www.edgewaternetworks.com/Support/SupportDocLanding.html#ReleaseNote
s
It is recommended that you reboot the 4300T prior to performing the upgrade. This
is to make sure there is enough dynamic memory available to handle the upgrade
process.
WARNING: When you update your software telephone
services will be unavailable for several minutes. It is therefore
advised that upgrades be performed during a maintenance
window when telephone traffic can be interrupted.