User manual

4300T User Manual Edgewater Networks, Inc.
Version 1.7 33
Static IP routing
In addition to locally connected IP networks the 4300T can forward traffic for a
remote data network by configuring a static route entry. Any packets destined for
the remote data network will be forwarded to the specified gateway address in the
entry.
Configure the static route
A. Select System.
B. Select System Overview.
C. Select Route.
D. Select the Apply Route checkbox.
E. Enter the IP Network address. This
address is the remote data network
you would like the 4300T to forward
to the gateway. The hosts portion of
the IP address should be set to “0”.
For example, 10.10.20.0
F. Enter the Netmask of the remote
data network. For example,
255.255.255.0
G. Enter the Gateway IP address of the
interface that will receive all packets destined for the remote data network.
H. Press Submit.
Delete the static route
A. Select System.
B. Select System Overview.
C. Select Route.
D. Remove the check in the Apply Route checkbox.
E. Press Submit.