User manual

4300T User Manual Edgewater Networks, Inc.
Version 1.7 18
4300T’s IP address within this VLAN, and the Network Mask. Press Add.
A new VLAN entry will be added to the VLAN Configuration above.
H. Depending on the mode of a physical port, assign it to one or more VLANs:
802.1 mode: Assign the port to any ONE VLAN.
802.1q mode: Assign the port to any number of VLANs
Perform steps A through F above for each VLAN you wish to create.
Modify an Existing VLAN Configuration
A. Select the Network link.
B. Select VLAN Settings.
C. Change the desired settings.
D. Press the Modify to modify the VLAN. The Reset button will restore the
input area being modified to its previous value.
Delete an Existing VLAN Configuration
A. Select the Network link.
B. Select VLAN Settings.
C. Press the trash can icon
next to the VLAN you wish
to delete.
Assign the 4300T’s ALG to your Priority VLAN
Once you have completed your VLAN
configuration you must assign the 4300T
ALG to the VLAN containing your VoIP
phones.
E. Select the VoIP ALG from the main
configuration menu.
F. Use the drop down menu to assign
the ALG to the VLAN ID containing
your VoIP phones.
G. Press Submit.
Configure the WAN interface
The 10/100 Ethernet WAN port is
configured as follows:
A. Select ADSL-PPPoE if you want to
connect to Internet using ADSL and your ISP has given PPPoE username and
password. Press Submit. You will be prompted to enter username and
password, enter these and press Submit again.
B. Select DHCP if you want to get WAN side IP address using DHCP server
available in WAN side of the network. Press Submit.