User manual

4300T User Manual Edgewater Networks, Inc.
Version 1.7 10
WARNING: Secure the power supply using a fastener or nearby
shelf so that it does not hang from the power connector.
Administration of the 4300T
The 4300T is configured using a web browser such as Internet Explorer or Netscape
Navigator. The 4300T is shipped with a pre-configured IP address for its LAN port of
192.168.1.1. To connect to the 4300T, do the following:
A. Connect a PC using an IP address of
192.168.1.2 and subnet mask of
255.255.255.0 to LAN port 4 of the
4300T.
B. Launch a web browser on the PC and
enter the URL string: 192.168.1.1.
Press Return. The initial 4300T main
configuration menu appears.
C. Select the Network link - enter the
username root and the password
default to log into the system.
IMPORTANT: For secure management of your network, be sure
to change the default userid and password as described under
Change the Administration Password.
D. Continue to configure the system using the information provided in
“Chapter 3: Configuring the 4300T”.
CAUTION: To reduce the risk of fire, use only 26 AWG or larger wire (e.g.
24, 22, 20, etc.) to connect the T1 port on your unit to an RJ-45 jack.