User manual

4200 User Manual Edgewater Networks, Inc.
Version 2.2 17
F. Enter the Time Offset (DHCP user option 2).
Set the time offset in hours from UTC for your local location.
G. Enter the NTP Server Address (DHCP user option 42).
This is the IP address of your NTP server.
H. Enter the WINS Address.
PLEASE note: If you are not using WINS this field may be left blank.
The Windows Internal Naming Service (WINS) is a service that keeps a database of
computer name-to-IP address mappings so that computer names used in Windows
environments can be mapped to IP addresses. The WINS Address is the IP address
of the WINS server in your network.
I. Enter the TFTP/FTP Server Name (DHCP user option 66).
Some IP phones use this setting to locate the TFTP or FTP servers which contain the
phone software image used during boot. By default this option is the same as the
TFTP server on the VoIP ALG page.
J. Press Submit.
Delete a DHCP IP Address
A. Select DHCP Server.
B. To delete an IP address or a range of IP
addresses highlight the entry in the DHCP
IP Addresses list and press the Delete key
on your keyboard.
C. Press Submit.
Disable The DHCP Server
A. Select DHCP Server.
B. Uncheck the Enable DHCP Server checkbox.
C. Press Submit.
Configure SNMP
The 4200 can be managed remotely by an SNMP network management system such
as HP Openview. The 4200 supports SNMPv1 and
MIB-II (RFC1213). All MIB-II variables are read
only. The MIB variables sysContact and
sysLocation are set by the web GUI.
A. Select System.
B. Select System Overview.
C. Select Services Configuration.
D. Select the Enable SNMP checkbox.