Manual

DISPLAY PANEL READINGS
The display window / panel is divided in two parts - Upper and lower. Upper part displays the
current ongoing operations. Lower part displays numbers to indicate cycle time, delay time or
spin speed.
When Power button is pressed - Three horizontal, lines show RESET, if wash prog
knob is at OFF position.
When Wash Prog is selected
When start button is pressed
When drying time is selected
Background lights up, two dots flash, followed by
cycle description, total time in minutes and the pre
set spin speed.
Background lights up, cycle description is flashed,
time left to complete comes up, and when the cycle
is completed END gets flashed.
Background lights up, drying time selected is shown.
When Drying cycle starts Background lights up, a sun sign appears an the
display window and drying time is shown. At the
end of the cycle the sun sign disapears.
DISPLAY PANEL READINGS
Good washing starts with hot water. To get your clothes clean and dry you need hot water, To
help you get hot water you Supra washer Dryer automatically _:_::tsthe water in the wash cycle.
There are 7 basic wash programs and 2 drying programs.
WASH
Cotton, Permanent Press, Quick, Delicate, Woot, Rinse and Spin, Daily and Cold wash.
DRY
Cotton Manual, Permanent Press Manual.
Each of these basic programs have many sub cycles that allow you to make a personal preference.
Refer to the wash program knob and to the wash cycle chart for assiatance. Besides this, you
also have many options to choose from. Refer to the button description Low.
1. SUPER WASH
2. RINSE PLUS
3. SPIN SPEED
4. ANTIWRINKLE
5. TIME DELAY
6. PRE WASH
7. START
8. DRY TIME
For washing large loads which need additional detergent, or fabrics
that soak up detergents or people with sensitive skin.
Alter or vary spin speed to choose from 400, 600, 800, 1000 or 1200 RPM.
For delicated clothes. Limits the spin to 800 rpm.
Choose a time to begin washing laundry.
For stained laundry.
!_::_ r:the program.
Choose between 4 drying times.
Page 10