Precision Cooled Refrigerator RP400MED User’s Guide For more information on other great EdgeStar products on the web, go to http://www.edgestar.
Important Safety Information Improper handling can cause serious damage to the EdgeStar precision refrigerator and/or injury to the user. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet. Please read and follow the safety information listed below to reduce the risk of fire, electric shock or injury. Electrical Safety Do not exceed the power outlet ratings.
Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. I INTRODUCTION ................................................................................................... 1 INSTALLING THE REFRIGERATOR ................................................................... 2 Free-standing installation: ............................................................................. 2 ELECTRICAL REQUIREMENTS ....................................................
Introduction Thank you for purchasing this EdgeStar precision refrigerator. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship. This manual contains important information regarding the proper installation, use and maintenance of your refrigerator. Following this manual will ensure that your product will work at its peak performance and efficiency.
Installing the Refrigerator The refrigerator should be installed in accordance with local electrical code requirements. The unit should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before you plug the precision refrigerator into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
Electrical Requirements ELECTRIC SHOCK HAZARD! Plug into a grounded 3-prong outlet. Never remove the grounding prong from the plug. Never use an adapter to bypass the grounding prong. DO NOT use an extension cord. Failure to follow these instructions can result in fire, Before you move your precision refrigerator into its final location, it is electrical shock, or death.
OPERATION Installation Check List before Operation 1. Have all packing materials and tape been removed from the interior and exterior of the precision refrigerator? 2. Have the installation instructions been followed, including connecting the machine to electricity? And has proper grounding been installed for the precision refrigerator? 3. Has the machine been leveled? 4.
Using the Refrigerator Thermometer and Alarm NOTE: Make sure the battery is installed before beginning operation. Sampling Rate: Fast: 10 seconds Normal: 60 seconds Temperature Range: °F -58 to 158 °C -50 to 70 WARNING: The small RESET button MUST be pressed whenever a change is made to °C/°F, FAST/NORMAL sampling, or the thermometer is plugged in or removed. Use a pointed object to push the RESET button on the back of the thermometer RESETTING MIN/MAX MEMORIES: 1.
Normal Sounds Your new precision refrigerator may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor, walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. Rattling noises may come from the flow of the refrigerant or the water line, Items stored on top of the precision refrigerator can also make noises.
CLEANING AND MAINTENANCE Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. Exterior Cleaning The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons of baking soda to 1 quart of water. Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting. Never use an abrasive or caustic cleaning agent.
Troubleshooting continued Issue The refrigerator does not turn on. The refrigerator will not reach the desired temperature Possible cause Solution There is a power failure. Ensure the refrigerator is plugged in and the power outlet has power. The refrigerator is not plugged in. Plug the unit in to a power outlet that has sufficient amperage. A fuse has blown or the circuit breaker is tripped. Replace the broken fuse in your fuse box or reset the breaker.
Specifications Description of product Precision Cooled Refrigerator Model RP400MED Voltage/Frequency AC 115V~60Hz Amperage 1.18A Input Power 120W Color White Refrigerant R134a, 2.3 oz. Temperature Range 32 - 50ºF Dimensions (Height x Width x Depth ) 33.1” x 19.4” x 23.1” Weight 79 pounds Note: Technical data and performance information is provided for reference only. Specifications are subject to change.
Limited Warranty: Full One-Year Parts and Labor This product is warranted by EdgeStar and is subject to any conditions set forth as follows: WHAT IS COVERED: For a period of ONE (1) YEAR from the date of original retail purchase, EdgeStar will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship.
EdgeStar Products 500 N. Capital of TX Hwy, Bldg 5 Austin, TX 78746 Toll Free: 1-866-319-5473 Web: http://www.edgestar.com E-mail: service@edgestar.com Register your product, download owner’s manuals, access additional troubleshooting resources, and obtain more information on other great EdgeStar products on the web at: http://www.edgestar.com Product contents and specifications may change without notice. Copyright © 2013 Living Direct, Inc. All rights reserved.
