Owner`s manual

EdgeStar Outdoor refrigerator 6
Reversing the Door Swing
To remove door from hinges:
1. Remove the top hinge cover and bottom louver.
2. Using a Phillips screwdriver, remove the screws, then remove top
hinge mat and top hinge. Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and turn it upside down so that the
handle is on the right. Set the door aside.
4. Using a flat screwdriver, remove the four plug buttons from the screw
holes on the door. Set aside.
5. Using a Phillips screwdriver, remove the magnet baffle and door
switch baffle, then place them on the opposite side at the top of the
door.
6. Push the four plug buttons into the spare screw holes.
To replace door on hinges:
1. Using a flat screwdriver, remove the plug buttons from the screw holes
opposite the door hinges, top and bottom. Set aside.
2. Remove the bottom hinge and place it on the opposite side at the
bottom of the door.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and replace the top hinge and top
hinge mat.
5. Replace top hinge cover and bottom louver.
Push the plug buttons into the spare screw holes on the top of the
cabinet.