Owner`s manual

I OTE: Do not overload 1
the unit. Proper loading
is I/2 to 2/3 fill with
similar items for most
effective performance.
Tips before Washing
Check for colorfastness.
Before washing any new garment you should always check to see if the
color will bleed to avoid damaging other items in the same wash cycle.
Checking for colorfastness is easy. Simply wet one corner of the fabric
and let it set for a few minutes. Get a white cloth and press down on the
wet part of the garment/item. If any color comes off onto the white cloth,
you know the item is not colorfast and will run in the wash cycle. This
garment/item should be washed separately.
Certain clothes should not be washed in washer:
These include embossed, resins, furs, fur decorations, clothes that easily
wrinkle such as silk, clothes with decorations, handmade items, and
fabrics fhaf discolor easily. Never wash clothes fhaf are stained with
chemicals such as gasoline, petroleum, benzene, paint thinner and
alcohol. These items should be hand washed first. Waterproof items
should not be washed such as car covers, ski suits, outside tablecloths,
etc.
Please
pay attention with regard to detergents
Low sudsing detergent or washing powder specially formulated for
front loading machines should be used according fo fiber types
(cotton, synthetic fiber, soft products and wool products), colors,
washing temperatures, degree of soil and types. Otherwise,
excessive bubbles may be generated and overflow from the unit.
Bleach can be harmful and damage clothes, so if is suggested fo
use as little as possible.
Powder detergents can leave residues in the clothes and
generate a smell. If using powder detergent an extra rinse is
recommended.
If there is too much detergent or wafer temperature is too low,
detergent does not easily dissolve completely. Make sure fo follow
the recommended amount fo avoid not rinsing properly from
clothes and unit.
Washing will depend on the weight of clothes, degree of soil level,
local wafer hardness as well as the recommendations from the
detergent manufacturers. Please consult the wafer company if
you are not clear on your wafer hardness.
Keep in Mind:
• Once a cycle is loaded it should not be left for a long period of
time in order fo avoid a moldy smell or causing stains fo set in.
Clothes should be washed in a timely manner for best care.
• Make sure clothes are washed according fo the stated washing
temperature fo avoid color change/distortion.
• Keep detergents and additives in safe dry places out of reach
from children.
• Only use detergents recommended for front loading, and do not
use regular soap as the residue can remain in clothing after wash.
• Please fake items out of your clothes pockets. Please check the
pockets of the clothes fo be washed, remove any loose items fo
avoid possible damage or unnecessary service call.
EdgeStar Washer/Dryer Combo 16