Owner`s manual

Level the washer
When positioning the washer/dryer combo, please first check if the legs
are closely attached fo the cabinet. If not, please turn them fo their
original positions by hand or with wrench and tighten the nuts with
wrench.
After positioning the washing machine, apply pressure on each corner of
the combo in sequence. If the unit is unstable when being pressed, the
legs must be adjusted fo level the machine.
, ii ............
Ensure the positioning status of the machine. Loosen the lock nut with a
wrench and turn the leg by hand until if closely contacts the floor. Hold
the leg with one hand and fasten the nut closely fo the cabinet with the
other hand.
After being locked properly, press down on each corner of unit again fo
make sure fhaf they have been adjusted properly. If if is still unstable,
repeat steps above until unit has no give. Af this time, double check by
placing a level on fop surface of the unit fo ensure unit is properly
adjusted.
EdgeStar Washer/Dryer Combo 10