Owner`s manual

7
Tools and Parts
Gather the required tools and accessories (Water hoses (2) and
Transportation “Shipping” Plugs are supplied with unit) before starting
installation. The accessories supplied are located in the washer drum.
 6mm nut driver 10mm socket with ratchet
 10 mm open-end wrench
 Adjustable wrench or 11mm socket with ratchet
 Adjustable wrench or 14mm open- end wrench
 Channel-lock adjustable pliers
 Carpenter’s level
 Water Hoses (2)- provided in drum
 Cable Tie
 Transportation “Shipping” Hole Plugs (4)- provided in drum
Unpacking the washing machine
Unpack your washer/dryer combo and inspect for damage that may
have occurred during transportation. If there is any damage to the
washing machine or any item is missing, please contact your dealer
immediately. Important, you will need all of your packaging including
transportation “shipping” bolts if you need to send back to manufacturer.
Dispose of the packing materials: The packing materials of this machine
may be dangerous to children. Once you have inspected machine and
find unit satisfactory, please dispose of them properly. Please dispose the
related packing materials according to the relevant local regulations.
Remove transport bolts
Before using this washing machine, transport “shipping” bolts must be
removed from the backside of this machine. Please follow the steps below
to remove the transport bolts:
1. Loosen all bolts and completely remove them along with the bushings
(bearings).
2. Cover the holes with transport hole plugs.
3. Important- Keep the transport “shipping” bolts for future use.
-
Transportation
“Shipping” Bolts
Water Hoses (2)
Transportation
“Shipping” Plugs
NOTE: As you unpack
your unit you may
find some residual
water in the drum
and/or coin trap as
we test all of our units
for quality assurance.