Compact Freezer CMF151L-1 Owner’s Manual For more information on other great EdgeStar products on the web, go to https://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.
Important Safety Information Improper handling can cause serious damage to the EdgeStar freezer or injury to the user. This freezer is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
General Safety To prevent back and other types of injuries, use at least two people to move and install the freezer. This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents IMPORTANT SAFETY INFORMATION ............................................................................................................... 1 TABLE OF CONTENTS ....................................................................................................................................... 3 FIRST TIME OPERATING INSTRUCTIONS .................................................................................................................... 4 INTRODUCTION..............................
First Time Operating Instructions Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding the packaging materials. It is advised that you keep the original box and packaging materials in case you ever need to move or ship the appliance in the future. Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Parts Identification Front View Installing the Compact Freezer Place the appliance in a location with a firm base. In order to prevent vibration and noise, the freezer must be leveled by adjusting the front foot. Choose a well-ventilated location with no less than five (5) inches of clearance around the freezer in all directions. Locate the freezer away from direct sunlight and heat sources such as an oven or boiler. Warning: This appliance must be grounded.
Operation Before plugging in your freezer for the first time remove all packaging materials and clean the freezer with lukewarm water and baking soda. Wipe the unit dry with a soft cloth. Temperature Control The temperature in the freezer is controlled by the thermostat control knob inside the freezer. Turn the thermostat control knob up or down to regulate the temperature inside the freezer. The markings on the control knob indicate the “MIN, MAX, and OFF” positions for the different temperature grades.
Troubleshooting Before calling for service please check for the following possible causes. The freezer is not working Check that the plug is inserted correctly into the wall socket. Check whether there is power to the wall socket by plugging in another appliance. Check the fuse in the freezer’s plug. The freezer is noisy when running Check that the freezer is level and is not in contact with another appliance or piece of furniture.
Specifications Note: Technical data and performance information are provided for reference only. Specifications are subject to change. Check the rating label on the freezer for the most accurate information. Description of product Upright Freezer Model CMF151L-1 Voltage / Frequency AC 115V ~ 60Hz Amperage 1.1 A Color White Cabinet and Door Storage Capacity 1.1 Cu. Ft. Refrigerant R600a, 0.92 oz. Temperature Range -11.
Edgestar Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as follows: WHAT IS COVERED: LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility.
