Beverage Cooler BWC121SS Owner’s Manual For more information on other great EdgeStar products on the web, go to http://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.
Important Safety Information Improper handling can cause serious damage to the EdgeStar beverage cooler and / or injury to the user. This beverage cooler is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
General Safety To prevent back and other types of injuries, use at least two people to move and install the beverage cooler. This appliance is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents IMPORTANT SAFETY INFORMATION .................................................................................................................I TABLE OF CONTENTS ...................................................................................................................................... III FIRST TIME OPERATING INSTRUCTIONS ..................................................................................................................... 1 INTRODUCTION ..........................
First Time Operating Instructions Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you ever need to move or ship the appliance in the future. Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Parts Identification Tip: Gather the model and serial number from the product label and write them down before installing the beverage cooler.
Internal Fan This unit is equipped with an internal fan that maintains a consistent internal temperature. Tip: Gather the model and serial number from the product label and write them down before installing the Beverage Cooler. Installing the Beverage cooler The beverage cooler should be installed in accordance with local electrical code requirements.
Installation Clearance Requirements Important Notes: Choose a location that has ambient temperatures above 50° F and below 95° F. Operation outside these temperatures may result in lowered efficiency or cause other adverse effects. This unit MUST be installed indoors in an area protected from the elements, e.g. wind, rain, water spray or drips. The beverage cooler should not be located next to ovens, grills, or other high heat sources.
Electrical Requirements ELECTRIC SHOCK HAZARD! Plug into a grounded 3-prong outlet. Never remove the grounding prong from the plug. Never use an adapter to bypass the grounding prong. DO NOT use an extension cord. Failure to follow these instructions can result in fire, electrical shock, or death.
Leveling the Beverage Cooler It is important for the beverage cooler to be leveled in order to work properly. In order to level the beverage cooler please use the following steps: 1. Turn the small leveling foot on the right side of the refrigerator to the right until completely tightened. 2. Place a carpenter’s level on top of the product to see if the beverage cooler is level from front to back and side to side. 3.
Reversing the Door Swing Tools needed: flathead screwdriver, Philips screwdriver Important: Before you begin, unplug the beverage cooler. To Remove the Door: 1. 2. 3. 4. Using a flathead screw driver carefully pry the top hinge cover off. Using a Philips screwdriver, remove the screws and take off the top hinge. Keep the parts together and set them aside. Lift the door off the bottom hinge and set the door aside. Remove the bottom hinge by removing the screws with a Philips head screwdriver.
Operation Installation Check List Before Operation 1. 2. 3. 4. 5.
Normal Sounds Your new beverage cooler may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor and walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the beverage cooler can also make noises.
Cleaning and Maintenance Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. Exterior Cleaning The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons of baking soda to 1 quart of water. Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting.
Troubleshooting Before Calling for Help If the unit appears to be malfunctioning, read through the “Operation” section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem may be something that can easily be solved or explained. Symptoms The beverage cooler turns on and off frequently. Possible Causes The room temperature is higher than the recommended ambient temperature. The door is being opened too often.
Symptoms The body of the beverage cooler is electrified. Possible Causes The unit is not grounded properly. The door gasket is dirty. The door gasket is not installed correctly. The shelves are incorrectly installed. Solutions Contact your local electrician to test your electrical grounding system. Manual defrosting is required; unplug the unit to allow the frost to melt.
Specifications Note: Technical data and performance information are provided for reference only. Specifications are subject to change. Check the rating label on the beverage cooler for the most accurate information. Description of product Freestanding Beverage Cooler Model BWC121SS Voltage / Frequency AC 115V~60Hz Amperage 1.
EdgeStar Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as follows: WHAT IS COVERED: LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility.
