Instructions / Assembly

English — 4
CHARGING THE DC 320 SHARPENER
Plug the adapter into the sharpener, then plug the cord into a wall outlet. For Optimum
Performance and Battery Life, charge fully before use. The battery takes 45-60 minutes to
recharge. One battery charge will last for up to 45 minutes of continuous sharpening.
Use only with Listed/Certified ITE Power Supply. Do not use an extension cord. Plug
charger directly into electrical outlet. Use only with the charger provided with the
appliance. Do not attempt to use this charger with any other product. Likewise, do not
attempt to charge this appliance with any other charger. Carefully route the power supply
cord to avoid damage from the knife blades while sharpening.
ON/OFF POWER SWITCH
The power switch positions are indicated by the “I” and “O” symbols. See symbols below.
DESCRIPTION OF THE CHEF’SCHOICE DIAMOND HONE KNIFE
SHARPENER DC 320
This advanced Diamond Hone Sharpener has three motor driven sharpening Stages 1, 2
and 3.
Figure 1. Inserting the blade in the left slot of
the Stage 1. Alternate individual pulls in left and
right slots.
Figure 2. Inserting the blade in the right slot of
Stage 1. Alternate pulls in left and right slots.
WHEN PLUGGED IN AND TURNED OFF:
Blinking Green charging
Solid Green fully charged
WHEN PLUGGED IN AND TURNED ON:
Blinking Green charging and running
Solid Green fully charged and running
WHEN UNPLUGGED AND TURNED ON:
Solid Green not charging and running
Blinking Red low battery, turn o and charge at least 3-5 min
Solid Red battery is dead, turn o and charge at least 3-5 min
Symbol for OFF position Symbol for ON position