Handbook

Handbook
ECWO5213-L Access Point ENGLISH
6
Getting Started
Edgecore ECWO5213-L supports web-based configuration. Upon the completion of hardware installation,
Access Point can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet
Explorer version 6.0 and above.
The default values of LAN IP address and subnet mask of ECWO5213-L are:
IP Address
192.168.1.10
Subnet Mask
255.255.255.0
Steps:
1. To access the web management interface, connect the administrator PC to the LAN port of ECWO5213-L
via an Ethernet cable. Then, set a static IP address on the same subnet mask as ECWO5213-L in TCP/IP
of your PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of ECWO5213-L (http://192.168.1.10) at
the address field, and then press Enter.
Example of entering ECWO5213-L’s default IP Address via a web browser
3. The following Admin Login Page will appear. Enter “admin” for both the Username and Password fields,
and then click Login.
Administrator Login Page