User's Manual

Quick Start Guide

– 5 –

6. Connect to the

Console Port

To make initial configuration changes to the AP, connect a PC to the AP’s console

port using the included console cable.

From a PC running VT-100 terminal emulator software, use the following settings:

◆ Baud rate — 115,200 bps

◆ Character Size — 8 Characters

◆ Parity — None

◆ Stop bit — One

◆ Data bits — 8

◆ Flow control — none

◆ Login Name — admin

◆ Password — null (there is no default password)

For information on manually configuring an IP address for the AP, refer to the

Installation Guide, which is on the Documentation CD included with the AP.

For further information on AP configuration and CLI commands, refer to the

Management Guide, which is on the Documentation CD included with the AP.

Console Port