User's Manual

Quick Start Guide

– 2 –

responsible for compliance with local regulations concerning items such as

antenna power, use of lightning arrestors, grounding, and radio mast or tower

construction. Therefore, it is recommended to consult a professional contractor

knowledgeable in local radio regulations prior to equipment installation.

Follow these steps to install the AP:

1. Unpack the AP Unpack the AP and check the package contents.

◆ WAP3110-L Enterprise Access Point

◆ AC Power adapter

◆ Console cable (RJ-45 to DB-9)

◆ Quick Start Guide (this guide)

◆ Regulatory and Safety Information

◆ Documentation CD — includes Installation Guide

2. Mount the AP After planning your installation, mount the unit on a wall or suspended ceiling

T-rail.

Mounting on a Wall

Set two screws in the wall 6.2 mm (2.4 in.) apart.

Slide the AP’s wall mounting slots down onto the screws so that the unit is secure.