User's Manual

– 32 –
4 WPS CONFIGURATION
The WPS (Wi-Fi Protected Setup) function allows you to add a new wireless
device to an existing network quickly.
N OTE : The WPS function is not supported in Windows 7.
If the wireless card supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless card and router using
either the Push Button Configuration (PBC) method or PIN method.
First, the WPS software should be installed. Follow these steps:
1. Insert the Resource CD into your CD-ROM drive.
2. Double-click My Computer, and then double-click the CD/DVD drive
where the installation CD was placed.
3. Open the SMCWUSBS-N4 folder, and double-click “wps.exe.” The
following figure (Figure 24) displays.
Figure 24: Prepare to Install WPS
4. Follow the step-by-step instructions to complete the WPS installation.
When completed, the WPS function can be enabled. The following sections
describe the two ways to use WPS.