User's Manual

– 13 –
2 INSTALLATION GUIDE
HARDWARE INSTALLATION
There are two ways to install the Adapter:
1. Plug the Adapter directly to the USB port on your computer.
2. Connect the Adapter and your computer through the USB cable
attached in package.
N OTE : The Found New Hardware Wizard screen will pop up when the
adapter is installed correctly. Click Cancel.
SOFTWARE INSTALLATION
FOR WINDOWS XP The CD-ROM that comes with the package contains the USB driver and
software utility for the Wireless USB Adapter.
The installation screens are similar for Windows 2000, Windows XP,
Windows Vista and Windows 7. The installation interface for Windows XP is
shown in this user guide.
To install the Wireless USB Adapter's driver and utilities for Windows 2000
and Windows XP, follow these steps:
1. Turn on your PC and wait until the Windows system has completely
started.
2. Load the EZ Installation & Documentation CD that comes with the
package. The install program should start automatically.
N OTE : If the install program does not start automatically, double-click My
Computer, and then double-click the CD/DVD drive where the installation
CD was placed. Open the SMCWUSBS-N4 folder and double-click
“Setup.exe.”
3. Click “Install Driver/Utility” to start the installation.