User's Manual

C HAPTER 14 | System Tools
Diagnostic
– 102 –
3. Click Save to save the configuration.
To configure the system automatically:
1. Select your local time zone.
2. Enter the IP address for NTP Server Prior.
3. Click the Get GMT button to get system time from Internet if you have
connected to the Internet.
N OTE : This setting will be used for some time-based functions such as
firewall. You must specify your time zone once you login to the router
successfully, otherwise, these functions will not take effect.
N OTE : The time will be lost if the router is turned off.
N OTE : The router will obtain GMT automatically from Internet if it has
already connected to Internet.
DIAGNOSTIC
Choose menu “System Tools->Diagnostic”, you can transact Ping or
Traceroute function to check connectivity of your network in the following
screen.
Figure 95: Diagnostic Tools