User's Manual

– 101 –
14 SYSTEM TOOLS
Choose menu “System Tools”, and you can see the submenus under the
main menu: Time Settings, Diagnostic, Setting Management, Password,
System Log, Statistics, Local Management and Remote Management. Click
any of them, and you will be able to configure the corresponding function.
The detailed explanations for each submenu are provided below.
TIME SETTING
Choose menu “System Tools->Time Setting”, you can configure the time on
the following screen.
Figure 94: Time Settings
Time Zone - Select your local time zone from this pull down list.
Date - Enter your local date in MM/DD/YY into the right blanks.
Time - Enter your local time in HH/MM/SS into the right blanks.
NTP Server Prior - Enter the address for the NTP Server, then the
Router will get the time from the NTP Server preferentially. In addition,
the Router built-in some common NTP Servers, so it can get time
automatically once it connects the Internet.
To configure the system manually:
1. Select your local time zone.
2. Enter date and time in the right blanks.