User's Manual

C HAPTER 11 | Access Control Settings
Host
– 86 –
■
Click Save to complete the settings.
Then you will go back to the Access Control Rule Management page and
see the following list.
Figure 74: Display Access Control Entry
HOST
Choose menu “Access Control->Host”, you can view and set a Host list in
the following screen. The host list is necessary for the Access Control Rule.
Figure 75: Host Settings
Host Description - Here displays the description of the host and this
description is unique.
Information - Here displays the information about the host. It can be
IP or MAC.
Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New button.
2. In the Mode field, select IP Address or MAC Address.
If you select IP Address, the screen shown is Figure 75.
1) In Host Description field, create a unique description for the host
(e.g. Host_1).
2) In LAN IP Address field, enter the IP address.
If you select MAC Address, the screen shown is Figure 76.