User's Manual

C
HAPTER
6
| Wireless Settings
Wireless Security
– 52 –
N
OTE
:
If you check the WPA/WPA2 radio button and choose TKIP
encryption, you will find a notice in red.
Figure 37: WPA/WPA2
Radius Server IP - Enter the IP address of the Radius Server.
Radius Port - Enter the port that radius service used.
Radius Password - Enter the password for the Radius Server.
Group Key Update Period - Specify the group key update interval in
seconds. The value should be 30 or above. Enter 0 to disable the
update.
WPA-PSK/WPA2-PSK - It’s the WPA/WPA2 authentication type based
on pre-shared passphrase.
Version - you can choose the version of the WPA-PSK security on
the drop-down list. The default setting is Automatic, which can
select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared
key of WPA) automatically based on the wireless station's capability
and request.
Encryption - When WPA-PSK or WPA is set as the Authentication
Type, you can select either Automatic, or TKIP or AES as
Encryption.
N
OTE
:
If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP
encryption, you will find a notice in red.
Figure 38: WPA-PSK/WPA2-PSK