User's Manual

C HAPTER 5 | Network Settings
WAN
– 33 –
Primary/Secondary DNS - (Optional) Enter one or two DNS
addresses in dotted-decimal notation provided by your ISP.
If your ISP provides a PPPoE connection, select PPPoE option, then enter
the following parameters:
Figure 20: WAN-PPPoE
User Name/Password - Enter the User Name and Password provided
by your ISP. These fields are case-sensitive.
Secondary Connection - It’s available only for PPPoE Connection. If
your ISP provides an extra Connection type such as Dynamic/Static IP
to connect to a local area network, then you can check the radio button
of Dynamic/Static IP to activate this secondary connection.
Disabled - The Secondary Connection is disabled by default, so
there is PPPoE connection only. This is recommended.
Dynamic IP - You can check this radio button to use Dynamic IP as
the secondary connection to connect to the local area network
provided by ISP.
Static IP - You can check this radio button to use Static IP as the
secondary connection to connect to the local area network provided
by ISP.