User's Manual

HAPTER

| Introduction

Front Panel

– 14 –

LED INDICATORS The

wireless Router

includes ten status LED indicators, as described in the

following table.

OTE

After a device is successfully added to the network by WPS, the WPS

LED will remain on for about 5 minutes and then turn off.

Table 2: LED Behavior

LED Status Description

Power On The unit is receiving power and is operating normally.

Off There is no power currently being supplied to the

unit.

System On The Router is initializing.

Flashing The Router is working properly.

Off The Router has a system error.

WLAN On/Flashing The 802.11n radio is enabled and

transmitting or receiving data through wireless links.

Off The 802.11n radio is disabled.

LAN (4 LEDs) On The Ethernet LAN port is connected to a PC or server.

Flashing The Ethernet port is connected and is transmitting or

receiving data.

Off The Ethernet port is disconnected.

WAN On The port has a valid connection to another device.

Flashing The port is connected and is transmitting/receiving

data.

Off The port is disconnected.

WPS On Indicates the WPS authentication of a device has

been successfully completed.

Fast Flashing A wireless device failed to be added to the network by

WPS.

Slow Flashing A wireless device is connecting to the network by

WPS. This process will last for 2 minutes.

Off The WPS is not in progress.