User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
4
| Configuring the Router
Bandwidth Control
– 99 –
◆ Egress Bandwidth - The upload speed through the WAN port.
◆ Ingress Bandwidth - The download speed through the WAN port.
RULES LIST Select Bandwidth Control->Rules List from the menu; you can view and
configure the bandwidth control rules in the screen below.
◆ Description - This is the information about the rules such as address
range.
◆ Egress bandwidth - This field displays the maximum and minimum
upload bandwidth through the WAN port, the default is 0.
◆ Ingress bandwidth - This field displays the maximum and minimum
download bandwidth through the WAN port, the default is 0.
◆ Enable - This displays the status of the rule.
◆ Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a QoS rule, follow the steps below.
1. Click “Add New,” as shown in Figure 87, you will see a new screen
shown in Figure 88.
2. Enter the information like the screen shown below.
3. Click the Save button.
Figure 87: Rule List