User's Manual

C HAPTER 4 | Configuring the Router
Access Control
– 93 –
1. Click “Add New” button in Figure 75 to enter the “Add or Modify a Host
Entry” page.
2. In Mode field, select MAC Address from the drop-down list.
3. In Host Description field, create a unique description for the host (e.g.
Host_1).
4. In MAC Address field, enter 00-11-22-33-44-AA.
5. Click Save to complete the settings.
Then you will go back to the Host Settings page and see the following list.
TARGET Select Access Control -> Target from the menu; you can view and set a
Target list in the screen, as shown in Figure 78. The target list is necessary
for Access Control Rules.
Figure 78: Target Settings
◆ Target Description - Here displays the description about the target
and this description is unique.
◆ Information - The target can be IP address, port, or domain name.
◆ Modify - To modify or delete an existing entry.
To add a new entry, follow the steps below.
1. Click the “Add New” button.
2. In Mode field, select IP Address or Domain Name.
a. If you select IP Address, the screen in Figure 79 is shown.
●
In Target Description field, create a unique description for the
target (e.g. Target_1).
●
In IP Address field, enter the IP address of the target.
●
Select a common service from Common Service Port drop-down
list, so that the Target Port will be automatically filled. If the