User's Manual

C HAPTER 4 | Configuring the Router
Access Control
– 89 –
Figure 73: Access Control Rule Management
◆ Enable Internet Access Control - Select the check box to enable the
Internet Access Control function, so the Default Filter Policy can take
effect.
◆ Rule Name - Here displays the name of the rule and this name is
unique.
◆ Host - Here displays the host selected in the corresponding rule.
◆ Target - Here displays the target selected in the corresponding rule.
◆ Schedule - Here displays the schedule selected in the corresponding
rule.
◆ Status - This field displays the status of the rule. Enabled means the
rule will take effect, Disabled means the rule will not take effect.
◆ Modify - Here you can edit or delete an existing rule.
To add a new rule, please follow the steps below.
1. Click the “Add New” button and the next screen will pop-up, as shown
in Figure 74.
2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
3. Select a host from the Host drop-down list or choose “Click Here To Add
New Host List”.
4. Select a target from the Target drop-sown list or choose “Click Here To
Add New Target List”.