User's Manual

C HAPTER 4 | Configuring the Router
DHCP
– 72 –
Enter the amount of time in minutes and the user will be “leased” this
dynamic IP Address. After the time is up, the user will be automatically
assigned a new dynamic IP address. The range of the time is 1 ~ 2880
minutes. The default value is 120 minutes.
◆ Default Gateway - (Optional.) Suggest to input the IP address of the
LAN port of the Router, default value is 192.168.2.1
◆ Default Domain - (Optional.) Input the domain name of your network.
◆ Primary DNS - (Optional.) Input the DNS IP address provided by your
ISP. Or consult your ISP.
◆ Secondary DNS - (Optional.) Input the IP address of another DNS
server if your ISP provides two DNS servers.
N OTE : To use the DHCP server function of the Router, you must configure
all computers on the LAN as "Obtain an IP Address automatically" mode.
DHCP CLIENTS LIST Select DHCP -> DHCP Clients List from the menu; you can view the
information about the clients attached to the Router in the next screen
(shown in Figure 54).
Figure 54: DHCP Clients List
◆ ID - The index of the DHCP Client.
◆ Client Name - The name of the DHCP client.
◆ MAC Address - The MAC address of the DHCP client.
◆ Assigned IP - The IP address that the Router has allocated to the
DHCP client.