User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
4
| Configuring the Router
Wireless
– 66 –
Figure 46: WPA/WPA2 - Personal(Recommended)
■
PSK Passphrase - You can enter between 8 and 63 ASCII
characters, or 8 to 64 Hexadecimal characters.
■
Group Key Update Period - Specify the group key update interval
in seconds. The value should be 30 or above. Enter 0 to disable the
update.
Be sure to click the Save button to save your settings on this page.
WIRELESS MAC
FILTERING
Choose Wireless -> MAC Filtering from the menu; you can then control
wireless access by configuring the Wireless MAC Address Filtering function,
as shown in Figure 47.
Figure 47: Wireless MAC Address Filtering
To filter wireless users by MAC Address, click Enable. The default setting is
Disable.
◆ MAC Address - The wireless station's MAC address that you want to
filter.
◆ Status - The status of this entry, either Enabled or Disabled.
◆ Description - A simple description of the wireless station.