User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
4
| Configuring the Router
Network
– 52 –
Figure 33: WAN-PPPoE
◆ User Name/Password - Enter the User Name and Password provided
by your ISP. These fields are case-sensitive.
◆ Secondary Connection - It is available only for PPPoE Connection. If
your ISP provides an extra Connection type such as Dynamic/Static IP
to connect to a local area network, then you can check the radio button
of Dynamic/Static IP to activate this secondary connection.
■
Disabled - The Secondary Connection is disabled by default, so
there is PPPoE connection only. This is recommended.
■
Dynamic IP - You can check this radio button to use Dynamic IP as
the secondary connection to connect to the local area network
provided by ISP.
■
Static IP - You can check this radio button to use Static IP as the
secondary connection to connect to the local area network provided
by ISP.