User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
4
| Configuring the Router
WPS
– 42 –
N
OTE
:
To make a successful connection using WPS, you should also
perform the corresponding WPS configuration on the new device.
For the configuration of a new device, this example uses an SMC Wireless
Adapter.
BY PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button
Configuration (PBC) method, you can add it to the network by PBC with the
following two methods.
Method One:
1. Enable the WPS function from Web management page.
2. Press the WPS button on the front panel of the Router.
Figure 17: Front Panel
3. Press and hold the WPS button of the wireless client for 2 or 3 seconds.
Figure 18: WPS Button
4. Wait until the next screen appears. Click Finish to complete the WPS
configuration.