User's Manual

C HAPTER 4 | Configuring the Router
Quick Setup
– 41 –
QUICK SETUP
Refer to “Quick Installation Guide” on page 31.
WPS
This section shows how to quickly add a new wireless device to an existing
network using WPS (Wi-Fi Protected Setup).
1. Select WPS from the menu. You will see the next screen, as shown in
Figure 16.
Figure 16: WPS (Wi-Fi Protected Setup)
■
WPS Status - Enable or disable the WPS function here.
■
Current PIN - The current value of the Router's PIN is displayed
here. The default PIN of the Router can be found in the label or User
Guide.
■
Restore PIN - Restore the PIN of the Router to its default.
■
Gen New PIN - Click this button, and then you can get a new
random value for the Router's PIN. You can ensure the network
security by generating a new PIN.
■
Add device - You can add a new device to the existing network
manually by clicking this button.
TO ADD A NEW DEVICE:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless adapter and Router using
either Push Button Configuration (PBC) method or PIN method.