User's Manual

C HAPTER 4 | Configuring the Router
Access Control
– 95 –
To add a new entry, follow the steps below.
1. Click the “Add New” button.
2. In Mode field, select IP Address or Domain Name.
a. If you select IP Address, the screen in Figure 94 is shown.
●
In Target Description field, create a unique description for the
target (e.g. Target_1).
●
In IP Address field, enter the IP address of the target.
●
Select a common service from Common Service Port drop-down
list, so that the Target Port will be automatically filled. If the
Common Service Port drop-down list doesn’t have the service
you want, specify the Target Port manually.
●
In Protocol field, select TCP, UDP, ICMP or ALL.
b. If you select Domain Name, the screen in Figure 95 is shown.
●
In Target Description field, create a unique description for the
target (e.g. Target_1).
●
In Domain Name field, enter the domain name, either the full
name or the keywords (for example google) in the blank. Any
domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed. You can enter 4
domain names.
3. Click the Save button.
Click the Delete All button to delete all the entries in the table.
Click the Next button to go to the next page, or click the Previous button
return to the previous page.
Figure 94: Add or Modify an IP Access Target Entry