User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
4
| Configuring the Router
Special Application
– 79 –
Figure 76: Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Click Modify in the entry you want to modify. If you want to delete the
entry, click the Delete.
2. Modify the information.
3. Click the Save button.
4. Click the Enable/Disable All button to enable/disable all entries.
5. Click the Delete All button to delete all entries.
6. Click the Next button to go to the next page and click the Previous
button to return the previous page.
SPECIAL APPLICATION
There are four submenus under the Special Application menu (shown in
Figure 77): Virtual Servers, Port Triggering, DMZ, and UPnP. Click any
of them and you will be able to configure the corresponding function.
Figure 77: The Special Application Menu
VIRTUAL SERVERS Select Special Application->Virtual Servers from the menu; you can
view and add virtual servers in the next screen (as shown in Figure 78).
Virtual servers can be used for setting up public services on your LAN, such
as DNS, Email and FTP. A virtual server is defined as a service port, and all
requests from the Internet to this service port will be redirected to the
computer specified by the server IP. Any PC that was used for a virtual