User's Manual

C HAPTER 4 | Configuring the Router
DHCP
– 76 –
DHCP
There are three submenus under the DHCP menu (shown in Figure 72):
DHCP Settings, DHCP Clients List, and Address Reservation. Click any of
them, and you will be able to configure the corresponding function.
Figure 72: The DHCP Menu
DHCP SETTINGS Select DHCP -> DHCP Settings from the menu. You can configure the
DHCP Server on the page, as shown in Figure 73. The Router is set up by
default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the
Router on the LAN.
Figure 73: DHCP Settings
◆ DHCP Server - Enable or Disable the DHCP server. If you disable the
Server, you must have another DHCP server in your network or you
must configure computers manually.
◆ Start IP Address - Specify an IP address for the DHCP Server to start
with when assigning IP addresses. 192.168.2.100 is the default start
address.
◆ End IP Address - Specify an IP address for the DHCP Server to end
with when assigning IP addresses. 192.168.2.199 is the default end
address.