User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
4
| Configuring the Router
Wireless
– 73 –
BY PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you
can add it to the network by PIN with the following two methods.
Method One: Enter the PIN into my Router.
1. Keep the default WPS Status as Enabled and click the “Add device”
button in Figure 58, then the following screen will appear.
Figure 68: Add Device
2. Select “Enter the new device's PIN” and enter the PIN code of the
wireless adapter in the field after PIN, as shown in the figure above.
Then click Connect.
N
OTE
:
The PIN code of the adapter is always displayed on the WPS
configuration screen.
3. For the configuration of the wireless adapter, selected “Enter a PIN into
my access point or a registrar” in the WPS configuration, as below, and
click Next.