User's Manual

C HAPTER 4 | Configuring the Router
Wireless
– 68 –
Figure 58: WPS (Wi-Fi Protected Setup)
■
WPS Status - Enable or disable the WPS function here.
■
Current PIN - The current value of the Router's PIN is displayed
here. The default PIN of the Router can be found in the label or User
Guide.
■
Restore PIN - Restore the PIN of the Router to its default.
■
Gen New PIN - Click this button, and then you can get a new
random value for the Router's PIN. You can ensure the network
security by generating a new PIN.
■
Add device - You can add a new device to the existing network
manually by clicking this button.
TO ADD A NEW DEVICE:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless adapter and Router using
either Push Button Configuration (PBC) method or PIN method.
N OTE : To make a successful connection using WPS, you should also
perform the corresponding WPS configuration on the new device.
For the configuration of a new device, this example uses an SMC Wireless
Adapter.
BY PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button
Configuration (PBC) method, you can add it to the network by PBC with the
following two methods.
Method One:
1. Press the WPS button on the front panel of the Router.