User's Manual

C HAPTER 4 | Configuring the Router
Wireless
– 62 –
Figure 51: WPA/WPA2
■
Radius Server IP - Enter the IP address of the RADIUS Server.
■
Radius Port - Enter the port that the RADIUS service uses.
■
Radius Password - Enter the password for the RADIUS server.
■
Group Key Update Period - Specify the group key update interval
in seconds. The value should be 30 or above. Enter 0 to disable the
update.
◆ WPA-PSK/WPA2-PSK - The WPA/WPA2 authentication type based on
a pre-shared passphrase.
■
Version - You can choose the version of the WPA-PSK security from
the drop-down list. The default setting is Automatic, which can
select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared
key of WPA2) automatically based on the wireless station's
capability and request.
■
Encryption - When WPA-PSK or WPA is set as the Authentication
Type, you can select either Automatic, TKIP, or AES as the
encryption type.
N OTE : If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP
encryption, you will find a notice in red, as shown in Figure 52.
Figure 52: WPA-PSK
■
PSK Passphrase - You can enter between 8 and 63 ASCII
characters, or 8 to 64 Hexadecimal characters.