User's Manual

C HAPTER 4 | Configuring the Router
Network
– 55 –
BINDING SETTING This page displays the IP & MAC Binding Setting table; you can
configure it as needed (as shown in Figure 42).
Figure 42: Binding Setting
◆ MAC Address - The MAC address of the controlled computer in the
LAN.
◆ IP Address - The assigned IP address of the controlled computer in
the LAN.
◆ Bind - Check this option to enable ARP binding for a specific device.
◆ Modify - To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click
the “Add New” button or “Modify” button, and then you will go to the next
page. This page is used for adding or modifying an IP & MAC Binding entry
(as shown in Figure 43).
Figure 43: IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
1. Click the Add New... button as shown in Figure 42.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click the Save button to save it.