User's Manual

C HAPTER 4 | Configuring the Router
Network
– 52 –
Some ISPs require that you register the MAC Address of your adapter.
Changes are rarely needed here.
◆ WAN MAC Address - This field displays the current MAC address of
the WAN port. If your ISP requires you to register the MAC address,
please enter the correct MAC address into this field in XX-XX-XX-XX-XX-
XX format (X is any hexadecimal digit).
◆ Your PC's MAC Address - This field displays the MAC address of the
PC that is managing the Router. If the MAC address is required, you can
click the Clone MAC Address To button and this MAC address will fill in
the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the
factory default value.
Click the Save button to save your settings.
N OTE : Only the PC on your LAN can use the MAC Address Clone function.
LAN Choose menu “Network-> LAN”, you can configure the IP parameters of
the LAN on the screen as below.
Figure 39: LAN
◆ MAC Address - The physical address of the Router, as seen from the
LAN. The value cannot be changed.
◆ IP Address - Enter the IP address of your Router or reset it in dotted-
decimal notation (factory default: 192.168.2.1).
◆ Subnet Mask - An address code that determines the size of the
network. Normally use 255.255.255.0 as the subnet mask.
N OTE : If you change the IP Address of LAN, you must use the new IP
Address to login the Router.