User's Manual

C HAPTER 4 | Configuring the Router
Network
– 44 –
◆ Default Gateway - (Optional) Enter the gateway IP address in dotted-
decimal notation provided by your ISP.
◆ MTU Size - The normal MTU (Maximum Transmission Unit) value for
most Ethernet networks is 1500 Bytes. It is not recommended that you
change the default MTU Size unless required by your ISP.
◆ Primary/Secondary DNS - (Optional) Enter one or two DNS
addresses in dotted-decimal notation provided by your ISP.
Click the Save button to save your settings.
3. If your ISP provides a PPPoE connection, select PPPoE option. And you
should enter the following parameters (Figure 33):
Figure 33: WAN-PPPoE
◆ User Name/Password - Enter the User Name and Password provided
by your ISP. These fields are case-sensitive.
◆ Secondary Connection - It is available only for PPPoE Connection. If
your ISP provides an extra Connection type such as Dynamic/Static IP
to connect to a local area network, then you can check the radio button
of Dynamic/Static IP to activate this secondary connection.
■
Disabled - The Secondary Connection is disabled by default, so
there is PPPoE connection only. This is recommended.