User's Manual
Table Of Contents
- Warranty and Product Registration
- Compliances
- About This Guide
- Contents
- Figures
- Tables
- Introduction
- Connecting the Router
- Quick Installation Guide
- Configuring the Router
- Configuring the PC
- FAQ
- Specifications
- Glossary
- Index
C
HAPTER
4
| Configuring the Router
Network
– 42 –
NETWORK
There are five submenus under the Network menu (shown in Figure 30):
WAN, MAC Clone, LAN, Dynamic DNS, and MAC Clone. Click any of
them to configure the corresponding function.
Figure 30: The Network Menu
WAN Select “Network>WAN”, you can configure the IP parameters of the WAN
on the screen below.
1. If your ISP provides the DHCP service, choose Dynamic IP, and the
Router will automatically receive IP parameters from your ISP. You can
see the page as follows (Figure 31).
Figure 31: WAN-Dynamic IP
This page displays the WAN IP parameters assigned dynamically by your
ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the