User's Manual

C HAPTER 4 | Configuring the Router
Quick Setup
– 34 –
QUICK SETUP
Refer to “Quick Installation Guide” on page 24.
WPS
This section shows how to quickly add a new wireless device to an existing
network using WPS (Wi-Fi Protected Setup).
Select“WPS” from the menu. The following screen (Figure 17) displays.
Figure 17: WPS (Wi-Fi Protected Setup)
◆ WPS Status - Enables or disables the WPS function.
◆ Current PIN - Displays the current value of the Router's PIN. The
default PIN of the Router can be found on the label or in the User
Guide.
◆ Restore PIN - Restores the PIN of the Router to its default value.
◆ Gen New PIN - Click this button to create a new random value for the
Router's PIN. You can ensure the network security by generating a new
PIN.
◆ Add device - You can manually add a new device to the existing
network by clicking this button.
ADDING A NEW
DEVICE:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless adapter and Router using
either the Push Button Configuration (PBC) method or the PIN method.
N OTE : To make a successful connection using WPS, you should also
perform the corresponding WPS configuration on the new device.